Printable 3D model of the TTC H6 Subway car.
by Richard Audette, January 2015

*** INSTRUCTIONS ***

Required Material:
- Truck pivot bolt: M5 10mm x 2
- Wheel bolt: M3 12mm x 8.  This size wasn't available at my hardware store.  I used 4-40x3/8.

Optional Material:
- Labels to print off decals (Decals.pdf)
- Paint (I used Testor's enamel)
- Permanent marker (for windows)

Print:
8 x SolidWheel.stl
2 x 2_wheel_pivot.stl
1 x either TTC H6 - No Branding.stl OR TTC H6.stl.  The later file includes the logos and train identification in the 3D print.

*** DETAILS ***

For more details on this subway car, see:
http://cptdb.ca/wiki/index.php?title=Can-Car_Rail_H6

This design was built from this drawing:
http://transit.toronto.on.ca/images/subway-5505-03.gif

The 2_wheel_pivot.stl and SolidWheel.stl files are from the Diesel Engine by Nick Randall.
http://www.thingiverse.com/thing:282278


*** TOOLS USED ***

The following tools were used to build this model:

Inkscape was used to create the basic 2D shapes.
https://inkscape.org/

The Inkscape to OpenSCAD converter was used to bring the shapes into OpenSCAD.
http://www.thingiverse.com/thing:25036

Finally, OpenSCAD was used to create the 3D model.
http://www.openscad.org/
